IEC 60754-1: Standard for determination of halogen acid gas content in cables

IEC 60754-2: Standard for the detection of gases produced by combustion of cable materials

GB/T 17650: Determination standard of total halogen acid gas

Equipment No.:               PX02001

Equipment Dimension:   1500(W)×450(D)×400(H)mm

Console Dimension:        500(W)×400(D)×250(H)mm

Power Supply:                 AC 220V,16A

Weight:                           APPR.80kg

Gas Source:                     The Compressed Air

• Integrated design, the sample conduit and the tube furnace are installed on the same plane, reducing position errors and enhancing the tightness of glassware

  
  

• Independent control box, easy to operate and arrange equipment

  
  

• The tube furnace is heated with a length of 600mm. The temperature module + power regulator + PID is used to adjust the furnace temperature, so that the furnace body is evenly heated to the target temperature, which can be heated to 950 ° C and reach a balance.

  
  

• Mesh housing protects the tube furnace and dissipates heat efficiently

  
  

• The high temperature K-type thermocouple measures the temperature of the sample area, the measurement range is 0-1100 °C, and the measurement accuracy is ±0.1 °C.

  
  

• The quartz tube made of heat-resistant quartz above 2mm is used for gas transmission and sample heating, and the pipe joint is frosted to increase the sealing performance

  
  

• The ceramic combustion boat is controlled to move by a strong magnet and a transmission bar, which can stably transfer the measured material to the furnace core measurement area

  
  

• The screw drive mechanism can move the traction tube to the quartz tube seal, with accurate positioning and stable operation, avoiding the damage of the quartz tube caused by human factors.

  
  

• Imported precision rotameter can control the flow of carrier gas, equipped with brand pressure gauge and pressure regulating valve to adjust the pressure of the air, so that the airflow can enter the equipment stably

  
  

• Equipped with two filter columns, packed with activated carbon and color-changing silica gel, for cleaning and drying the carrier gas

  
  

• Programmable logic controller (PLC) + touch screen control, intelligent temperature adjustment, make the furnace temperature more accurate

  
  

• The total amount of halogen acid, conductivity and pH value, heat-resistant quartz tube cleaning test procedures are built in the system, and standard reference values are stored.

  
  

• Equipped with glass washing bottles, beakers, measuring cylinders, magnetic stirrers and other equipment required for the test

  
  

• Equipped with a high-quality pH and conductivity meter to measure the pH and conductivity of solutions