ASTM D7309-2007: Standard Test Method for Determining the Flammability of Plastics and Other Solid Materials by Microcombustion Calorimeter

EMC 89/336/EEC: Electromagnetic compatibility 89/336/EEC

LVD 72/23/EEC

BS EN 60204-1: Safety of machinery - Electrical equipment for machinery - Part 1: General requirements

BS EN 746-2: Industrial thermal processing equipment. Safety requirements for combustion and fuel handling systems

Equipment No.:  PX01008

Dimension:  343(W)×663(D)×1560(H)mm    

Power Supply:  AC220V,16A

Weight:  APPR.80kg

Gas Source:  Purity above 99.99% oxygen and nitrogen compressed air

• Integrated structure design, beautiful and generous

  
  

• Combustion furnace: program to control the temperature of combustion furnace heating to the specified temperature, constant temperature, temperature drift does not exceed 5K/h. Equipped with overtemperature protection device to protect the safety of equipment and personnel during the test

  
  

• Temperature range: room temperature -1000℃, imported electric heating wire, over temperature protection, high-performance heating elements, longer service life

  
  

• Multiple cooling devices, easy to heat the instrument

  
  

• Sample heating rate can be adjusted

  
  

• The sample cup is equipped with a temperature sensor

  
  

• The sample cup can be automatically moved to the combustion furnace, special design to ensure soft contact

  
  

• The equipment provides anaerobic and aerobic environmental high temperature decomposition test mode

  
  

• High precision MFC (mass flow controller), control air, oxygen, nitrogen gas intake, response time less than 1S, accuracy F.S±1%.

  
  

• Imported oxygen sensor, range: 0-100%, T90< 6 s. Accuracy ±0.1%, linear range: F.S±1%

  
  

• The equipment is fast in testing and convenient in testing

  
  

• LABVIEW data acquisition software, configuration computer control

  
  

• Displays the running status of devices in real time

  
  

• Calibrate equipment and store calibration data results

  
  

• Collect data during the test.

  
  

• Heat release rate coefficient (W/g), combustion heat (J/g), ignition temperature (℃) and other parameters were calculated.