Horizontal combustion test: UL94 HB, IEC 60695-11-10, IEC 60707, ISO 1210, GB/T 2408;

50W vertical combustion test: UL94 V0, V1, V2, IEC 60695-11-10, ISO 1210, GB/T 2408;

500W vertical combustion test: UL94 5VA, 5VB, IEC 60695-11-20, ISO 9770, GB/T 5169.17;

Thin film material vertical combustion test (optional) : VTM-0, VTM-1, VTM-2, ISO 9773;

Equipment No.:                        PX03002

Dimension:                               1350(W)×700(D)×1000(H)mm

Bottom Chamber Dimension:  1350(W)×700(D)×650(H)mm

Power Supply:                          AC 220V, 50Hz, 2A

Weight:                                    APPR.70kg

• Steel structure box, test box volume more than 0.75 cubic meters, to provide adequate clean air for the test.

  
  

• Large observation window, the inner wall of the box is coated with dark color, and the illumination is within 20Lux, which is convenient to observe the combustion condition of the sample.

  
  

• Smoke exhaust device is installed on the top, which can automatically open to discharge test exhaust gas after the end of the test.

  
  

• Introduction of industrial design concept of structure, appearance and interface design, integrated panel structure, easy to operate, friendly interface, ergonomic and operating habits, beautiful appearance

  
  

• Equipped with HUMBOLDT Tirell fire source, inner diameter 9.5±0.3mm, in accordance with ASTM D5025 standard, can produce standard requirements of 50W&500W flame

  
  

• Burner Angle can be 0, 20, 45 degrees convenient adjustment, through the motor + control software to meet the requirements of different testing methods. Through the sliding device, the positioning device can be quickly delivered to the predetermined fire location

  
  

• High pressure pulse automatic ignition, ignition stability and reliability, high security

  
  

• Equipped with stainless steel horizontal and vertical sample fixture, durable.

  
  

• The sample fixture through the motor + screw module, through the software control to achieve horizontal and vertical movement, to achieve the test position requirements.

  
  

• Equipped with imported precise rotor flowmeter to control gas flow, equipped with imported differential pressure measurement burner back pressure.

  
  

• Equipped with brand pressure gauge and pressure regulating valve to adjust gas pressure, equipped with solenoid valve to control gas on and off, to ensure the safety of equipment.

  
  

• Programmable logic controller (PLC)+ touch screen control, can realize automatic control/detection/calculation/data storage.

  
  

• Test time, fire time can be set by oneself, software automatic timing.

  
  

• Linear combustion rate (V) calculated by PLC, data displayed and saved by touch screen.

  
  

• Different test methods can be switched on the touch screen, and test standard reference values can be displayed on the touch screen.

  
  

• It has the function of reminding the arrival of flame impact time and automatically cutting off the air source without experiment for 10 minutes to ensure the safety of use.

  
  

• Optional 50W, 500W flame calibration kit, imported brand thermocouple measurement accuracy ±0.1℃, can automatically generate calibration curve and determine.