ISO 9772: Determination of Horizontal Burning Properties of Foamed Plastics

GB/T 8332: Test method for combustion performance of foamed plastics Horizontal combustion method

GB/T 8333: Test method for combustion performance of rigid foam plastics Vertical combustion method

Equipment No.:                        PX01010

Equipment Dimension:            1350(W)×700(D)×1000(H)mm

Bottom Chamber Dimension:  1350(W)×700(D)×650(H)mm(Optional)

Power Supply:                          AC 220V, 50/60Hz, 2A

Weight:                                    APPR.70kg

Gas Source:                              Methane With Purity Above 95%

• Steel structure box, the volume of the test box is more than 0.75 cubic meters, providing sufficient clean air for the test.

  
  

• Large observation window, the inner wall of the box is painted black, and the illumination is within 20Lux, which is convenient for observing the combustion status of the sample.

  
  

• A smoke exhaust device is installed on the top, which can be automatically opened to discharge the test exhaust gas after the test.

  
  

• The structure, appearance and interface design of imported industrial design concepts, integrated panel structure, convenient operation, friendly interface, ergonomic and operating habits, beautiful appearance

  
  

• Equipped with American HUMBOLDT Tirell fire source, the inner diameter of the lamp tube is 9.5±0.3mm, in line with ASTM D5025 standard, and equipped with the fishtail lamp head required by the standard for horizontal test

  
  

• The burner angle can be adjusted between 15 degrees and 90 degrees to meet the requirements of different test methods. Through the motor drive, the burner can be quickly sent to the predetermined test fire position

  
  

• High voltage pulse automatic ignition, stable and reliable ignition, high safety

  
  

• The horizontal test jig is a stainless steel metal mesh plate, equipped with a metal mesh of the standard required specifications for the foam level test. The vertical test fixture is a stainless steel chimney supported by a fixed pin, equipped with a ruler to measure the flame height, and a heat-resistant tempered glass is installed on the front for easy observation

  
  

• The horizontal and vertical test fixtures can achieve smooth movement and precise positioning in the horizontal and vertical directions through the sliding rail structure. During different tests, the fixture can be switched freely without re-installation.

  
  

• Equipped with imported precision rotor flowmeter to control gas flow, and equipped with imported differential pressure meter to measure the back pressure of the burner.

  
  

• Equipped with brand pressure gauge and pressure regulating valve to adjust gas pressure, equipped with solenoid valve to control gas on and off, to ensure the safety of equipment use.

  
  

• Programmable logic controller (PLC) + touch screen control, can realize automatic control/detection/calculation/data storage

  
  

• Test time, fire time can be set by yourself, software automatically timed

  
  

• Linear burning rate (V) PLC calculation, data touch screen display and save

  
  

• Various test methods can be switched on the touch screen, and the test standard reference value can be displayed on the touch screen