IEC60695-2-10~13, (GB/T5169.10-13-2006) "Basic Glow Wire/Hot Wire Test Methods, Glow Wire Test Apparatus and General Test Methods, etc." and UL 746A, IEC829, DIN695 and other standards

Equipment No.:                        PX01006

Dimension:                               1350(W)×700(D)×1000(H)mm

Bottom Chamber dimension:  1350(W)×700(D)×650(H)mm

Power Supply:                          AC 220V, 50/60Hz,10A

Weight:                                    APPR. 70kg

• Steel structure box, the volume of the test box is greater than 0.75 cubic meters.

  
  

• A smoke exhaust device is installed on the top, which can be automatically opened to discharge the test exhaust gas after the experiment is over.

  
  

• The structure, appearance and interface design of imported industrial design concepts, integrated panel structure, convenient operation, friendly interface, ergonomic and operating habits, beautiful appearance

  
  

• Constant current heating system, temperature range 500～1000℃

  
  

• Temperature error: ±10°C (500～750°C); ±15°C (750～1000°C)

  
  

• Equipped with Φ1.0mmK type armored thermocouple to measure the glow wire temperature, the measurement range is 0-1000℃, and the measurement accuracy is ±0.1℃.

  
  

• Stainless steel clamps, can install samples of different shapes and specifications

  
  

• The trolley + French code structure can make the glow wire probe exert a pressure of 0.95±0.1N on the sample, and can control the penetration depth of the glow wire to 7±0.5mm

  
  

• Programmable logic controller (PLC) + touch screen control, the timing time is automatically set on the touch screen and the time is displayed.

  
  

• The program automatically records the burning time, light-off time and test burning time, the program automatically timed, time error: ±0.1s.

  
  

• Equipped with ignition bedding of 10mm thick white pine board

  
  

• Equipped with silver foil for temperature calibration